41
POls that
have
been preloaded
as
part of the background map can
be
saved
as
a user-entered
POls. Preloaded POls cannot
be
deleted;
it
just copies
it
to the
My
Points
of
Interest
portion of the database.
1. Press
MENU.
2.
Use
the
Arrow
joystick to highlight Pts
of
Interest.
3.
Press
ENTER.
4.
Use
the
Arrow
joystick up/down to highlight Background
Map.
5.
Use
the
Arrow
joystick left/right to select
Nearest
or
Alphabetical.
6.
Press
ENTER.
7. [Only
if
Alphabetical selected]
Use
the
Arrow
joystick and the
ENTER
button
to
enter the first few characters of the
POI
you
are
searching for. Highlight
OK
and
press
ENTER
to continue.
8.
Use
the
Arrow
joystick to highlight the
POI
to
be
copied.
9. Press
ENTER.
10.
Use
the
Arrow
joystick to highlight Save.
11. Press
ENTER.
Steps
12
through
14
are
optional.
12.
Use
the
Arrow
joystick to highlight the field
you
want to change.
13.
Press
ENTER.
14a. If the Icon field is selected:
Use
the
Arrow
joystick to select the icon desired and
press
ENTER.
To
aid in your selection, the type of icon selected
is
displayed
in
the
information block at the top of the keypad.
14b.
If
the Name field
is
selected:
Use
the
Arrow
joystick to select the character desired
and press
ENTER.
If
you
make a mistake, highlight Back and press
ENTER.
To
access the lower-case characters, highlight
Shift
and press
ENTER.
To
clear
everything
and
start
over,
highlight
CLEAR
and press
ENTER.
When
you
are
satisfied with the name, highlight
OK
and press
ENTER.
Note: User-entered
POI
names can
be
up
to
20
characters long (including spaces).
14c.
If
the Message field
is
selected:
Use
the keypad displayed, just
as
was
described
in 14b, to enter a message for this
POI.
15.
When the Icon, Name and Message fields are
ready,
use
the
Arrow
joystick to
highlight
Save.
16.
Press
ENTER.
17. Locate the
file
where the
POI
is
to
be
saved
and press
ENTER.
To Next Page
Loading...
Need help?
General
