Magellan eXplorist - Starti Ng Anew Active Track Log

Starting a New Active Track Log
Before you can start a new active track log, you need to stop the one that is presently
recording.
1.
Press MENU.
2.
Use the Arrow joystick to highlight Track Log.
3. Press ENTER.
4.
Use the Arrow joystick to highlight Active Track.
5. Press ENTER.
6. Highlight
Stop Logging. (If Resume Logging is displayed, the Track Log has
already been stopped. Go to step 10.)
7.
Press ENTER.
8.
Use the Arrow joystick to highlight Active Track.
9. Press ENTER.
10. Highlight
New Track.
11. Press ENTER.
60