42
POls
that
have been preloaded
as
part of the background map can
be
viewed
on
the Map
screen to assist you in locating a POI.
1. Press
MENU.
2. Use the
Arrow
joystick to highlight
Pts
of
Interest.
3. Press
ENTER.
4.
Use
the
Arrow
joystick up/down
to
highlight Background
Map.
5.
Use
the
Arrow
joystick left/right to select
Nearest
or Alphabetical.
6. Press
ENTER.
7. [Only
if
Alphabetical selected]
Use
the
Arrow
joystick and the
ENTER
button to
enter the
first
few characters of the
POI
you
are searching for. Highlight
OK
and
press
ENTER
to continue.
8.
Use
the
Arrow
joystick
to
highIight the
PO
I to
be
viewed.
9. Press
ENTER.
10.
Use
the
Arrow
joystick to highlight
View.
11.
Press
ENTER.
12.
The Map screen will
be
displayed in the Cursor mode. The cursor will
be
directly
over the
POI
you
have
selected.
You
may
use
the
Zoom
buttons to change the scale
of the map displayed; and
if
your position icon is within range,
it
will
be
shown.
13.
Press
ESC
to return to the detail screen of POls found
in
step 8.
Note: Remember
that
pressing the
NAV
button will return
you
to the last viewed Map
screen.
In
step
13
if
you
are finished with the POls in the
POI
database,
you
could
press
NAV
to
close the
POI
database and return to the last viewed Map screen.
To Next Page
Loading...
Need help?
General
