10
Trip Time Length of time traveling since the last time the
counter was reset to zero.
Arrival Time Estimated time at which the vessel is expected
to reach your destination waypoint.
Arrival Time to Last Waypoint Estimated time at which the vessel is expected
to reach the last waypoint on the active route.
Time Local Time.
Chronometer Displays the chronometer.
Countdown Displays the countdown.
Distance to Waypoint Distance to travel to reach the destination
waypoint.
Distance to Last Waypoint Distance to travel to reach the last waypoint on
the active route.
Distance Traveled Distance the vessel has already traveled.
Odometer 1 Distance counter 1.
Odometer 2 Distance counter 2.
XTE Acronym for Cross (X) Track Error. Indicates
the distance between the vessel's current
position and the direct line between your
starting point and your destination waypoint.
The letter R (Right) or L (Left) indicates
whether your vessel is to the right or left of the
direct line between your starting position and
your destination waypoint.
CPE Acronym for Circle of Probable Error. Indicates
the radius of the circle containing 50% of the
positions calculated by your GPS.
Altitude Your altitude.
Water Level Height of the water at the selected port.
Battery Voltage The voltage of the battery to which the GPS is
connected.
Note: When you select a type of data to display this selection applies
only to the currently displayed screen. Example: the setting for the
configurable window on Position Screen 1 is independent from the
setting for the configurable window on Navigation Screen 1.
Setting the Local Time or a Date (tide or current calculation)
The Date and Time windows that display the symbol allow you to enter
a new value.
The hours, minutes, days and years are entered in European format
(dd/mm/yy) using the alphanumeric keypad, and the months are selected
with the and arrows on the
button.
To Next Page
Loading...
Need help?
General