Mahr Digimar 816 CL User Manual

51
Mahr GmbH • Digimar 816 CL
EN
Description / Sequence Symbols / Pictures
– Press the function key „Temperature compensation“
– With the „YES“ or „NO“ keys the temperature compensation can
be switched ON or OFF
– Enter the coefficient of expansion, for example:
Steel 11,500 µm/m/°C
Aluminum 23,8 µm/m/°C
– To confirm, press the „Accept“ key
If measurement is being conducted in inch, the display will switch from
°C to °F (Fahrenheit).
The coefficient of expansion can be entered in µinch/inch/°F.
Note:
When the temperature compensation is switched on, it does not
compensate if the ambient temperature lies within the calibration
temperature +/- 1°C or during usage or when the temperature drops
below 10°C or above 40°C.
If the temperature sensor is missing or when switching on the height
measuring instrument the temperature is below 10°C or above 40°C,
the operator must switch off the temperature compensation.
When the temperature compensation is active a T in a square is
displayed in on the top right corner of the display.
If the temperature compensation is switched on, but at present not
active only an empty square is indicated.
YES NO

Mahr Digimar 816 CL Specifications

General

Brand	Mahr
Model	Digimar 816 CL
Category	Measuring Instruments
Language	English