Mahr Digimar 816 CL User Manual

53
Mahr GmbH • Digimar 816 CL
EN
Description / Sequence Symbols / Pictures
8.1.3 Exchanging the batteries
The battery can be changed without the height measuring instrument
losing data (except for the time and date).
– Switch OFF the height measuring instrument
– Disconnect the charging device from the height measuring
instrument
– Remove the battery cover, by unscrewing the 2 knurled thumb
screws, ill. 1
– Carefully remove the battery pack out off the retaining spring
(clips), ill. 2
– Press the new battery pack into the retaining spring and reconnect
the plug to the battery pack, ill. 4
– Replace the battery cover and insert and tighten the knurled
thumb screws
– Attach the new battery pack to the mains adapter and charger for
a min. 5 hours.
Attention
Please only use the specified battery pack!
Order no. 4429449 - NI-MH 4.8 V - 7000mAh (with 3 cables)
1
2
3
4

Mahr Digimar 816 CL Specifications

General

Brand	Mahr
Model	Digimar 816 CL
Category	Measuring Instruments
Language	English