Maintenance work on the superstructure
8.6 Hydraulic system
8 - 46 3 302 744 en Maintenance manual
GMK5250L
09.03.2018
Establishing the
operating
conditions
After having changed the oil filters and topping up the oil, you must
re-establish the operating conditions.
Opening the valve
• Open the valve – lever (1) parallel to the line.
• Start the engine.
• Carry out all hydraulic functions several times to remove any air in the
system.
• Check that none of the oil filters is leaking.
• Check the oil level through the inspection glass on the hydraulic oil tank.
Top up oil, if necessary;
à p. 8 - 45.
S
Risk of damage to the hydraulic pumps.
Open the valve prior to starting the engine.
This prevents damage to the hydraulic pumps.
To Next Page
Loading...
Need help?
General
