Manitowoc Grove GMK 5250L Maintenance Manual

Maintenance work on the superstructure
8.14 Other maintenance work
09.03.2018
Maintenance manual 3 302 744 en 8 - 87
GMK5250L
8.14.3 Lubricating the crane cab door
Grease, spare
parts, tools
–Brush.
Prerequisites – The turntable is locked.
– The engine must be switched off and secured against unauthorised use;
à p. 2 - 3.
Greasing
• With the door closed, clean the rails (1) out-
side.
• Lubricate the rails (1) lightly with a brush.
• Open the door completely using the
handle (2) – the door locks in place.
• Clean the rails (3).
• Lubricate the rails (3) and the rollers (4)
lightly with a brush.
• Pull the unlocking device (5).
• Check if the door moves smoothly on the
rails and if it locks easily.
If the door is sluggish or does not close properly, have it reset by
Manitowoc Crane Care or an authorised GROVE-dealer.
M 12
Designation GROVE part no.
Grease: RHUS SW 2, 1 kg can 03325215

Manitowoc Grove GMK 5250L Specifications

General

Brand	Manitowoc
Model	Grove GMK 5250L
Category	Construction Equipment
Language	English