Manitowoc Grove GMK 5250L Maintenance Manual

Maintenance work on the carrier
7.6 Transmission
7 - 46 3 302 744 en Maintenance manual
GMK5250L
09.03.2018
7.6.5 Transmission oil change
Oil, spare parts
and tools
– Receptacle, approx. 20 l (5 gal); à p. 2 - 4.
– Torque wrench for torque of 25 Nm (18.4 ft lbf) and 60 Nm (44.25 ft lbf).
– Connecting piece and hose (tool box); à p. 7 - 112.
Prerequisites – The gear oil must be at operating temperature (70 to 95 °C (160 to 200 °F)).
– The truck crane must be raised on outriggers or parked over an inspection
pit.
– The engine must be switched off and secured against unauthorised use;
à p. 2 - 3.
Draining oil
Y 3
Gear oil in
litres (gal)
Specification
Classification
GROVE part no.
17.5 (4.6)
(with oil
cooler)
Fuchs Titan
Cytrac MB Synth
API-GL-4; SAE 75 W-90
04162042
Designation Quantity GROVE part no.
Filter 1 03328342
Spring 1 03328343
Gasket 1 03328344
Gasket 24 x 29 Cu DIN 7603 1 00117145
G
Risk of scalding from gear oil at operating temperature.
You could burn yourself by gear oil escaping in an uncontrolled manner at
operating temperature. Wear appropriate protective gloves and take care
not to come into contact with the gear oil.
O
Risk of environmental damage due to leaking consumables.
Always let consumables drain into suitable receptacles. Wipe up any con-
sumables that have leaked.
Store/dispose of consumables and any soaked equipment properly.
Ask about the applicable regulations.

Manitowoc Grove GMK 5250L Specifications

General

Brand	Manitowoc
Model	Grove GMK 5250L
Category	Construction Equipment
Language	English