Maintenance overview
5.2 Maintenance plans
5 - 18 3 302 744 en Maintenance manual
GMK5250L
09.03.2018
5.2.11 Maintenance plan Y 10
Maintenance work on the CARRIER:
every 120 months/after 200,000 km (124,000 mi)
Steel fabrication
– Check the load-bearing steel fabrication. For further information,
please contact
Manitowoc Crane Care.
Maintenance work on the SUPERSTRUCTURE:
every 120 months/after 12,000 oper. hrs.
Electrical system
– Have the battery on the electronics board replaced à p. 8 - 80
Steel fabrication
– Check the load-bearing steel fabrication. For further information,
please contact
Manitowoc Crane Care.
Rated capacity limiter (RCL)
– Have the RCL checked by Manitowoc Crane Care.
To Next Page
Loading...
