Manitowoc Grove GRT9165

Grove Published 7-23-2020, Control # 668-02 4-161
GRT9165 OPERATOR MANUAL OPERATING PROCEDURES
4
• Switching over the input mode:
- Select and confirm a symbol (1) for the next
component – symbol red.
• Accept the displayed rigging mode:
- Select and confirm the symbol (2), refer to
Accepting the Rigging Code, page 4-164.
Enter the other components of the current rigging mode in
the same way.
Counterweight
• Select and confirm the symbol (1, Figure 4-184).
• Use the buttons (2) or (3) to select the required
counterweight combination, e.g. 0.0 klb.
8849-32a
FIGURE 4-183
1
2
9905-3
8849-33a
FIGURE 4-184
1
1
9905-4