MAINTENANCE AND LUBRICATION RT9130E-2 OPERATOR MANUAL
5-2
Published 3-1-2018, Control # 559-03
local Manitowoc Cranes distributor or Manitowoc Crane
Care.
Lube intervals are to be used as a guideline only. Actual lube
intervals should be formulated by the operator to correspond
according to conditions such as continuous duty cycles and/
or hazardous environments.
NOTE: All fluids and lubricants may be purchased by
contacting an authorized Manitowoc distributor or
Manitowoc Crane Care Parts Department.
CAUTION
Possible Equipment Damage!
Chassis grease lubricants must not be applied with air
pressure devices as this lubricant is used on sealed
fittings.
The multipurpose grease applied during manufacturing is
of a lithium base. Use of a non-compatible grease could
result in damage to equipment.
To Next Page
Loading...
Need help?
General
