5-17
RT9130E-2 OPERATOR MANUAL MAINTENANCE AND LUBRICATION
Published 3-1-2018, Control # 559-03
Item
Lube Point
Description
Figure
No.
Approved
Lubricant
Lube
Capacity
Lube Interval Application
Turntable
30
Turntable Gear
Box
Figure 5-5
GL-5
Extended
Service Interval
Gear Lubricant
6829012964
5.28 qt
(4.9 l)
• Check and fill every
50 hours
• Drain and fill after
first 250 hours and
every 500 hours or
12 months thereafter.
Fill until oil is at
dipstick markings
31
Turntable Gear
and Drive Pinion
Figure 5-5
EP-OGL
Open Gear
Lubricant
6829102971
Coat all
teeth
500 hours or 6 months Spray on
32
Turntable
Bearing
Figure 5-5
EP-MPG
Extreme
Pressure
Multipurpose
Grease
6829003477
Until
grease
extrudes
the whole
circumfer-
ence of the
bearing
500 hours or 6 months
2 grease fittings at
the front of the
turntable.
33
Turntable Swivel
Lock Pin
Not shown
EP-OGL
Open Gear
Lubricant
6829102971
Coat pin 500 hours or 6 months Spray on
NOTE: Rotate the turntable 90° and apply grease to fittings. Continue rotating 90° and grease the fittings until the whole
bearing is greased.
34 Hose Rollers Figure 5-5
EP-MPG
Extreme
Pressure
Multipurpose
Grease
6829003477
Until
grease
extrudes
250 hours or 3months 2 grease fittings