EasyManua.ls Logo

Manitowoc MLC165-1 - Assembly Area, Parts Access, and Pin Management

Manitowoc MLC165-1
246 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Reference Only
BOOM MLC165-1 SERVICE/MAINTENANCE MANUAL
4-12
Published 05-26-17, Control # 238-02
Removing Straps from Service
Straps removed from service should be clearly marked to
prevent accidental future use. Rendering the strap useless in
some way, such as cutting off an end, is recommended.
Inspection Checklist
A Strap Inspection Checklist is provided at the end of this
section. The checklist can be reproduced as needed.
Signed and dated copies of the Strap Inspection Checklist
must be kept on file at all times for each strap, as the
checklists may be required to verify warranty or product
liability claims.
If no damage is found or damage is within specification,
check the box (
)next to the item to indicate that its specific
condition was evaluated and found acceptable. If damage is
not within specification, indicate so in the box next to the item
(for example: D to indicate damage).

Table of Contents

Other manuals for Manitowoc MLC165-1

Related product manuals