Manitowoc MLC165-1 - Identification and Location of Components

Reference Only
Manitowoc Published 05-26-17, Control # 238-02 1-5
MLC165-1 SERVICE/MAINTENANCE MANUAL INTRODUCTION
1
IDENTIFICATION AND LOCATION OF COMPONENTS
Figure 1-1. Overall View
Item Description
1Lowerworks
2 Upperworks
3 Boom Butt
4 Boom Stop (physical)
5 Boom Butt Wire Rope Guide
6 Drum 3 (luffing hoist or auxiliary)
7 Insert: 6 m (19.7 ft) with Sheaves
8 Guide Sheaves (in insert)
9 Load Lines
10 Insert: 3 m (9.8 ft)
11 Insert: 6 m (19.7 ft)
12 Boom Straps
13 Insert: 12 m (39.4 ft)
14 Load Block
15 Weight Ball
16 Boom Top
17 Boom Top Wire Rope Guide
18 Lower Boom Point
19 Upper Boom Point or Jib