Manitowoc MLC165-1 Service Maintenance Manual

Reference Only
©2017 Manitowoc
Published 05-26-17, Control # 238-02
SERVICE/MAINTENANCE MANUAL
This manual is divided into the following sections:
SECTION 1 INTRODUCTION
SECTION 2 HYDRAULIC SYSTEM
SECTION 3 ELECTRICAL SYSTEM
SECTION 4 BOOM
SECTION 5 HOISTS
SECTION 6 SWING SYSTEM
SECTION 7 POWER TRAIN
SECTION 8 UNDER CARRIAGE
SECTION 9 LUBRICATION
SECTION 10 ACCESSORIES
NOTICE
The serial number of the crane and applicable attachments (for example, luffing jib) is
the only method your Manitowoc dealer or the Manitowoc Crane Care Lattice Team has
of providing you with correct parts and service information.
The serial number is located on a crane identification plate attached to the operator cab
and each attachment. Refer to the Nameplate and Decal Assembly drawing in Section 2
of this manual for the exact location of the crane identification plate.
Always furnish serial number of crane and its attachments when ordering parts or
discussing service problems with your Manitowoc dealer or the Manitowoc Crane Care
Lattice Team.
To prevent death or serious injury:
• Avoid unsafe operation and maintenance.
Crane and attachments must be operated and maintained by trained and
experienced personnel. Manitowoc is not responsible for qualifying these
personnel.
• Do not operate or work on crane or attachments without first reading and
understanding instructions contained in Operator Information Manual and
Service Manual supplied with crane and applicable attachments.
• Store Operator Information Manual and Service Manual in operator cab.
If Operator Information Manual or Service Manual is missing from cab,
contact your Manitowoc dealer for a new one.
WARNING
This manual has been prepared for and is considered part of -
MLC165-1
Crane Model Number
XXXXXRef
Crane Serial Number
1
4
5
6
7
8
2
3
9
10

Manitowoc MLC165-1 Specifications

General

Brand	Manitowoc
Model	MLC165-1
Category	Construction Equipment
Language	English