Mark-10 F Series User Manual

Series F Test Frames + IntelliMESUR
®
Software User’s Guide
59
TOC 
Company Logo
Browse for a company logo, or other image, and select the desired alignment at the top of the
report.
Test Image
If the test is saved in Favorites with an associated image, that same image is included in the
report template by default. Otherwise, browse to the desired image.
Include
System Information
 IntelliMESUR software version
 Test frame model number
 Test frame force capacity
 Test frame serial number
 Test frame firmware version
 Force sensor model number
 Force sensor force capacity
 Force sensor serial number
 Force sensor previous calibration date
 Force sensor next calibration date
Results
Graph
Company Info
Use this space to enter your company’s contact information, or any other pertinent information.
This will appear directly below the logo.
Report Title
Initial Text, Additional Text, Conclusion Text
After filling in the above information, optionally save the template by selecting Save Template.
Otherwise, select Print Preview to preview the report or Print to create it.
An example report is as follows:
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Mark-10 F Series Specifications

General

Brand	Mark-10
Model	F Series
Category	Test Equipment
Language	English