Masibus Automation VMS4SE User Manual

User Manual 51
VMS4SE(Vibration Monitor)
REF NO: mVMA/om/101
Issue No: 01
(selection)
1: YES
p.l.md
lg.conf
Periodic Logging
Mode
hold/OWLP
(HOLD/OVLP)
0: HOLD
1: OVERLAP
0
(Refer Note 5)
-
(P.L.md)
(LG.CONF)
P.M.RS
lg.conf
Periodic Log
Memory
Reset(/Clear)
yes / no
(YES/NO)
0 : NO
1: YES
0
(Refer Note 5)
-
(P.M.rS)
(LG.CONF)
p.l.HH
lg.conf
Periodic Log
time - Hour
0 to 23
0
(Refer Note 5)
-
(P.L.HH)
(LG.CONF)
p.l.mm
lg.conf
Periodic Log
time – Minute
0 to 59
0
(Refer Note 5)
-
(P.L.MM)
(LG.CONF)
p.l.ss
lg.conf
Periodic Log
time – Second
0 to 59
1
(Refer Note 5)
-
(P.L.SS)
(LG.CONF)
E.log
lg.conf
Event Logging
Enable
strt/stop
(Strt/Stop)
0: STOP
1: START
0
-
(E.LOG)
(LG.CONF)
E.l.mp
lg.conf
Event Log
channel
mapping
(selection)
yes / no
(YES/NO)
0 : NO
1: YES
0 (for all
channel)
(Refer Note 5)
-
(E.L.MP)
(LG.CONF)
E.l.md
lg.conf
Event Logging
Mode
hold/OWLP
(HOLD/OVLP)
0: HOLD
1: OVERLAP
0
-
(E.L.Md)
(LG.CONF)
E.M.RS
lg.conf
Event Log
Memory
Reset(/Clear)
yes / no
(YES/NO)
0 : NO
1: YES
0
-
(E.M.rS)
(LG.CONF)
Hour
lg.conf
RTC – Hour
0 to 23
0
-
(Hour)
(LG.CONF)
Min
lg.conf
RTC – Minute
0 to 59
0
-
(Min)
(LG.CONF)
Sec
lg.conf
RTC – Second
0 to 59
0
-
(Sec)
(LG.CONF)
Date
lg.conf
RTC – Date
1 to 31
0
-
(date)
(LG.CONF)
Mon
lg.conf
RTC – Month
1 to 12
0
-
(Mon)
(LG.CONF)
year
lg.conf
RTC – Year
1 to 255
0
-
(yEAr)
(LG.CONF)
Note 6:
1) Periodic and Event Channel mapping (selection) parameter is used to select the channels for
data logging. Mapping cannot be changed during Data logging is ON. For channel mapping
first stop logging, retrieve records and reset memory.

Masibus Automation VMS4SE Specifications

General

Brand	Masibus Automation
Model	VMS4SE
Category	Monitor
Language	English