Masibus Automation VMS4SE User Manual

User Manual 55
VMS4SE(Vibration Monitor)
REF NO: mVMA/om/101
Issue No: 01
4) Security Mode :
Pressing MENU key DATA window shows sCr.t (SCr.t) message and Parameter window
shows MODE (Mode) message. Press MENU key again PARAMETER window shows pWd
(PWD) message (if and only if password is set then only. Otherwise it will enter into sub menu),
press MENU Key to enter into edit mode of password and then press INCREMENT key or
DECREMENT key to modify the password and then press MENU Key to enter into Security
Mode. DATA window shows Pr.md (Pr.md) message and PARAMETER window shows
SCURTY (SCURTY) message. By pressing MENU Key, DATA window shows current password
of Program Mode. Then use MENU Key to enter into editing mode and use INCREMENT and
DECREMENT key to modify value if required. OR press INCREMENT key again to go to next
parameter Cf.md (CF.md). ESCAPE KEY is used to come out CF.md (sub parameter of Security
mode).
Table 28 Security Mode Parameters
Security Mode
Data
Window
Parameter
Window
Name
Setting name and
description
Default
value
Shows only if
Symbol
Symbol
0
pwd
Security Mode
Password
0 to 9999
0
Password of Security
mode is other than zero
0
(PWD)
pr.md
scurty
Set Password for
Program Mode
0 to 9999
0
-
(Pr.md)
(SCURTY)
CF.md
scurty
Set Password for
Configuration Mode
0 to 9999
0
-
(CF.md)
(SCURTY)
Cl.md
scurty
Set Password for
Configuration Mode
0 to 9999
0
-
(CL.md)
(SCURTY)
sp.md
scurty
Set Password for
Security Mode
0 to 9999
0
-
(SP.md)
(SCURTY)
f.rst
scurty
Factory reset
See Factory reset
parameter menu
-
-
(F.rSt)
(SCURTY)
 Factory Reset Parameter :
By pressing MENU key again, PARAMETER window shows pWd (PWD) message. Then press
MENU Key to enter into edit mode of password and then press INCREMENT key or
DECREMENT key to modify the password and then press MENU Key to enter into Factory Reset
Menu. In the menu, DATA window shows CAL (CAL) message and PARAMETER window
shows f.rst (F.RST) message. By pressing MENU Key, it enters into editing mode and use
INCREMENT and DECREMENT key to modify which value you need to be of default value OR
press INCREMENT key again to go to next parameter Cf.md (CF.md). ESCAPE KEY is used to
come out CF.md (sub parameter of Security mode).
Table 29 Factory Reset Menu
Factory Reset Parameter Menu
Data
Window
Parameter
Window
Name
Setting name and description
Default
value
Shows only if
Symbol
Symbol
0
pwd
Factory reset Mode
0 to 9999
0
-

Masibus Automation VMS4SE Specifications

General

Brand	Masibus Automation
Model	VMS4SE
Category	Monitor
Language	English