Matrix Sparsh VP110

Matrix SPARSH VP110 User Guide 129
account.1.sip_server.1.address = matrix_ippbx.com
account.1.sip_server.1.port = 5060
account.1.sip_server.1.expires = 3600
account.1.sip_server.1.retry_counts = 3
account.1.sip_server.2.address = 192.168.1.15
account.1.sip_server.2.port = 5060
account.1.sip_server.2.expires = 3600
account.1.sip_server.2.retry_counts = 3
##DNS SRV
account.1.transport = 3
account.1.naptr_build = 0
##Fallback Mode
account.1.fallback.redundancy_type = 1
account.1.fallback.timeout = 120
##Failover Mode
account.1.sip_server.1.failback_mode = 3
account.1.sip_server.1.failback_timeout = 120
account.1.sip_server.1.register_on_enable = 0
account.1.sip_server.2.failback_mode = 0
account.1.sip_server.2.register_on_enable = 0
To configure SIP Account and server redundancy feature via web user interface:
• Click on Account->Register.
• Select Enabled from the Line Active list.
• Select Enabled from the Register list.
• Configure parameters like Label and Display Name. Also configure the Register Name, User Name, and
Password as provided by your ITSP (Internet Telephony Service Provider).
• Select Enabled from the Enable Outbound Proxy Server list and configure the Outbound Proxy Server
address and Port if your ITSP uses an outbound server.
• Select the desired value from the Transport list.