McNeilus Contender - Electrical System; Lighting System; Pneumatic System; Coalescing Filter

89
© 2013 McNeilus Truck and Manufacturing, Inc.
Contender Front Loader
Preventive Maintenance
3.2 Electrical System
SAFETY NOTICE
Perform your company’s Lockout/Tagout
procedure. If your company does not have a
Lockout/Tagout procedure, follow OSHA
1910.147 and 1910.146 Confined Space as
appropriate.
3.2.1 Lighting System
• Daily Checks - The lighting system is inspected by the
operator or skilled service personnel.
Check to ensure that all exterior lights on the refuse vehicle
and chassis are functioning correctly. Replace any burned-out
bulbs with the same type.
3.3 Pneumatic System
Perform your company’s Lockout/Tagout procedure. If
your company does not have a Lockout/Tagout procedure,
follow OSHA 1910.147 and 1910.146 Conned Space as
appropriate.
3.3.1 Coalescing Filter
• Daily Checks - The coalescing lter is drained by the
operator or skilled service personnel.
Locate the drain tting (Figure 45, Item 1) on the bottom of the
coalescing lter.
Figure 45
F
L
O
W
1
Drain the lter by turning the drain tting counterclockwise.
Turn the drain tting clockwise after all moisture and
contaminants have drained from the canister.