McNeilus Contender - Traveling Procedure - Standard

33
© 2013 McNeilus Truck and Manufacturing, Inc.
Contender Front Loader
Operation
1.3 Traveling Procedure - Standard
Before beginning travel to the next site, be sure that all
hydraulic functions are in their HOME positions. This means
that the:
1. Tailgate is fully closed.
2. The arms and forks must be positioned properly for travel.
3. The arms and forks can either be positioned with the forks
raised and arms raised above the windshield (Figure 5,
Item 1), or with the forks tucked and the arms fully raised
(Figure 6, Item 2).
4. Turn PUMP rocker switch OFF to disable hydraulic
functions.
5. Turn all warning and strobe lights ON.
1
Figure 5
2
Figure 6