McNeilus Contender - 3.2.2 Manual Cycling of Pack;Eject

59
© 2013 McNeilus Truck and Manufacturing, Inc.
Contender Front Loader
Operation
3.2.2 Manual Cycling of Pack/Eject
Conditions
(Applies to Extend Function Only)
• Tailgate CLOSED indicator light must be green
• Side door indicator light must be off
• Top Door OPEN indicator light must be green
• Arms must be lowered below cab
• Engine speed must be below 1600 rpm
Manual cycling of the Pack/Eject Functions is controlled by the
EXTEND button or the RETRACT button located on the in-cab
control panel. With the tailgate CLOSED, the pack/eject can
only travel to the EXTEND position (Figure 26, Item 2).
Press and hold the EXTEND button to manually control the
extend movement of the pack/eject. When the button is
released, the pack/eject will stop at its current position.
Press and hold the RETRACT button located on the in-cab
control panel to retract the pack/eject. The pack/eject will
retract to the HOME position (Figure 26, Item 1). When the
RETRACT button is released, the pack/eject will stop at its
current position.
1
2
Figure 26