105
© 2013 McNeilus Truck and Manufacturing, Inc.
Contender Front Loader
Preventive Maintenance
6.2 Scheduled PM Lubrication
Lubricate all the following points with a high quality EP No. 2
lithium grease.
Scheduled PM lubrication intervals are based on 3 weeks
or 150 hours. If the refuse vehicle is operated more hours or
double shifted, the maintenance interval must be adjusted
accordingly.
Perform your company’s Lockout/Tagout
procedure. If your company does not have a
Lockout/Tagout procedure, follow OSHA
1910.147 and 1910.146 Confined Space as
appropriate.
Lubrication Points Lubricate Every 3 Weeks or Every 150 Hours
Ref. Description
No. of
Fittings
Comments
F Tailgate Cylinder - Base End 2 Two Cylinders - One Per Side
F Tailgate Cylinder - Rod End 2 Two Cylinders - One Per Side
G Tailgate Latch Pin 2 Two Latch Pins - One Per Side
H Tailgate Hinge Pin 2 Two Hinge Pins - One Per Side
J1 Top Door - Base End 1
J2 Top Door - Rod End 1
K Body Pivot Pin 2 Two Pivot Pins - One Per Side
L Service Lift Cylinder - Base End (OPTIONAL) 2 Two Cylinders - One Per Side
L Service Lift Cylinder - Rod End (OPTIONAL) 2 Two Cylinders - One Per Side
M PTO Shaft U-Joints 3
N Tailgate Prop Pivot (OPTIONAL) 2 Two Pivot Pins - One Per Side
To Next Page
Loading...
