McNeilus Contender - Traveling Procedure - Residential

34
© 2013 McNeilus Truck and Manufacturing, Inc.
Contender Front Loader
Operation
1.4 Traveling Procedure - Residential
Before beginning travel to the next site, be sure that all
hydraulic functions are in their HOME positions. This means
that the:
1. Tailgate is fully closed.
2. The arms and forks must be positioned properly for travel.
3. For a residential application equipped with a carry can,
the arms must be fully raised with the carry can inserted
into the hopper (Figure 7, Item 1). Never travel to the
next site with the can positioned low (Figure 8,
Item 2). This position is for work only.
4. Turn PUMP rocker switch OFF to disable hydraulic
functions.
5. Turn all warning and strobe lights ON.
WARNING
Depending on what size carry can you use,
verify the overall height of the truck with the
carry can inserted into the hopper does not
exceed the specified overall truck height
listed on the height decal on the truck.
Failure to comply may cause serious injury
or death or damage to equipment.
1
Figure 7
2
Figure 8