McNeilus Contender - 3.1 E-STOP (Emergency Stop) Function

56
© 2013 McNeilus Truck and Manufacturing, Inc.
Contender Front Loader
Operation
3.0 Control Functions
3.1 E-STOP (Emergency Stop) Function
Press any of the E-STOP buttons (Figure 24) to
IMMEDIATELY DISABLE refuse vehicle and Hydraulic
functions.
The E-STOP button is a safety function. Pressing the E-STOP
button disables all refuse vehicle Electrical, Pneumatic, and
Hydraulic functions.
Figure 24
3.1.1 In-Cab Control Panel E-STOP Button
Pull up on the button to release the in-dash control panel
E-STOP button (Figure 25, Item 1).
3.1.2 Outside Control Box E-STOP Button
Pull up on the button to release the outside control box
E-STOP button (Figure 25, Item 2).
NOTE
All E-STOP buttons must be in the UP
position before the refuse vehicle functions
can be restored.
NOTE
If Packer functions are not operational, reset
the controls by pulling up ALL of the E-STOP
buttons and turning the pump back on.