90
© 2013 McNeilus Truck and Manufacturing, Inc.
Contender Front Loader
Preventive Maintenance
3.4 Mechanical System
Perform your company’s Lockout/Tagout
procedure. If your company does not have a
Lockout/Tagout procedure, follow OSHA
1910.147 and 1910.146 Confined Space as
appropriate.
3.4.1 Refuse Vehicle Body and Components
• Daily Checks - The refuse vehicle body and components
are inspected by the operator or skilled service personnel.
Inspect the body and all components for binding, damage,
loose or missing parts.
3.4.2 Tailgate Seal
• Daily Checks - The tailgate seal is inspected by the
operator or skilled service personnel.
Inspect the tailgate seal for tears, damage, or excessive wear.
Ensure that the seal is fully seated in the tailgate channel.
Inspect the mounting straps to ensure they are secure.
3.5 Operation
Be sure all non-operator personnel are at
least 20 feet (6 meters) away from all areas
of the Packer.
Serious personal injury or death may occur.
WARNING
Make sure the area above the vehicle is
clear of objects and power lines before
raising the arm.
Serious personal injury or death may occur.
DANGER
3.5.1 Refuse Vehicle Controls
• Daily Checks - The refuse vehicle controls are checked
for proper operation by the operator or skilled service
personnel.
Operate all functions to validate they are operational. Verify
that all indicator lights and alarms are operational.
To Next Page
Loading...