McNeilus Contender - Page 120

108
© 2013 McNeilus Truck and Manufacturing, Inc.
Contender Front Loader
Troubleshooting
NOTE
Isolate the problem before taking any
remedial actions.
1. Unless further damage will occur, repeat the steps that
caused the problem. Refer to the Operation section of this
manual to be sure that the correct operating procedures
have been followed. Often a simple step in the standard
operating procedure has been forgotten.
2. Refer to the troubleshooting chart. It is designed to
help you troubleshoot problems at your location, and
is organized in a logical sequence. Look under the
appropriate equipment section, and for the specic
problem within the chart.
3. Perform the checkout procedure and remedial actions
listed within the chart to isolate the problem.
4. If your particular problem is not listed, or the remedial
actions provided do not resolve the problem, we suggest
that you take the vehicle to a service shop, refer to the
appropriate service manual, or contact McNeilus Truck
and Manufacturing, Inc. for assistance.
5. If you have questions or need help, please call the
McNeilus Parts and Service number listed in the
Foreword of this manual.
6. Perform your company’s Lockout/Tagout procedure.
If your company does not have a Lockout/Tagout
procedure, follow OSHA 1910.147 and 1910.146
Conned Space as appropriate.