MDS 05-2806A01, Rev. A MDS iNET 900 User’s Guide 25
• Alarmed—The unit is has detected one or more alarms that
have not been cleared.
• Uptime—Elapsed time since the iNET unit was powered-up.
• Firmware Version—Version of firmware that is currently
active in the unit.
• Hardware Version— Hardware version of the iNET
printed circuit board.
• Serial Number—Make a record of this number. It must be
provided to purchase Authorization Keys to upgrade unit capa-
bilities. (See “Authorization Keys Menu” on Page 56.)
2.2.2 Main Menu
The next screen, the Main Menu, is the entryway to all user-controllable
features. Notice, the iNET’s Device Name appears will appear at the top
of this and all other screens as a reminder of the unit that is currently
being controlled.
Figure 2-6. Main Menu Screen
• Starting Information Screen—Select this item to
return to the start-up screen. (See “Starting Information
Screen” on Page 24)
• Network Configuration—Tools to configure the data
network layer of the iNET 900. (See “Network Configuration
Menu” on Page 28)
• Radio Configuration—Tools to configure the wireless
(radio) layer of the iNET 900. (See “Radio Configuration
Menu” on Page 29)
• Serial Gateway Configuration—Tools to configure
the two serial ports. (See “Serial Gateway (Port) Configuration
Menu” on Page 32)
• Device Information—Top level user-specific and defin-
able parameters, such as unit password. (See “Device Informa-
tion Menu” on Page 26)
• Performance Information—Tools to measure the radio
and data layer’s performance of the iNET network.
(See “Performance Information Menu” on Page 41)
Library Admin Office
Main Menu
-==========================================================================-
A) Starting Information Screen E) Device Information
B) Network Configuration F) Performance Information
C) Radio Configuration G) Maintenance
D) Serial Gateway Configuration H) Diagnostic Tools
Select a letter to configure an item
To Next Page
Loading...
