EasyManua.ls Logo

Mec 4069RT - Platform Control Handle Functions

Mec 4069RT
256 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
“4069RT” Service and Parts ManualMarch 2014
Page VI
H
YDRAULIC
S
YSTEM
HYDRAULIC FLUID UNDER PRESSURE CAN PENETRATE AND BURN SKIN,
DAMAGE EYES, AND MAY CAUSE SERIOUS INJURY, BLINDNESS, AND EVEN
DEATH.
CORRECT LEAKS IMMEDIATELY.
Hydraulic fluid leaks under pressure may not always be visible. Check for pin hole
leaks with a piece of cardboard, not your hand.
E
LECTRICAL
S
YSTEM
Prevent damage to battery and/or electrical system;
• Always disconnect the negative battery cable first.
• Always connect the positive battery cable first.
When the negative cable is installed, a spark will occur if contact is made between the
positive side of the battery and a metal surface on the machine. This can cause damage
to the electrical system, battery explosion, and personal injury.
T
OTAL
S
YSTEM
FAILURE TO PERFORM PREVENTIVE MAINTENANCE AT RECOMMENDED
INTERVALS MAY RESULT IN THE UNIT BEING OPERATED WITH A DEFECT
THAT COULD RESULT IN INJURY OR DEATH OF THE OPERATOR.
IMMEDIATELY REPORT TO YOUR SUPERVISOR ANY DEFECT OR
MALFUNCTION. ANY DEFECT SHALL BE REPAIRED PRIOR TO CONTINUED
USE OF THE AERIAL WORK PLATFORM.
INSPECTION AND MAINTENANCE SHOULD BE PERFORMED BY QUALIFIED
PERSONNEL FAMILIAR WITH THE EQUIPMENT.

Table of Contents

Other manuals for Mec 4069RT

Related product manuals