Mec 4069RT - Machine Function Testing; Function Test Procedures

“4069RT” Service and Parts ManualMarch 2014
Page X
E MERGENCY L OWERING
IF THE CONTROL SYSTEM FAILS WHILE THE PLATFORM IS ELEVATED,
USE THE EMERGENCY LOWERING PROCEDURE TO SAFELY LOWER THE
PLATFORM.
DO NOT CLIMB DOWN THE ELEVATING ASSEMBLY OR EXIT THE PLATFORM.
Figure 1-4: Emergency Lowering
The Emergency Lowering
System is used to lower the
platform in case of power
failure.
To lower the platform, push
down on the Emergency
Lowering Switch, located
on the Base Control panel.
ART_4281