03-11-24 75
9 Warning Displays
Warnings are displayed in clear text in case of any abnormal situation.This section
shows the available texts if not mentioned in other sections of this manual.
This section lists all available warning texts.
9.1 Warnings Related to the MPA and
Pre-Dilute Inlet
This is a normal warning and indicates that the MPA was pulled out. The instru-
ment is waiting for the MPA to be inserted where after a count cycle starts auto-
matically.
The MPA cycle was aborted by pressing the [CE] key. Push back the MPA. The
system will not start a count cycle.
The MPA was pulled out before the cycle was finished. Push back the MPA
adapter and the instrument will restore the flow system with a prime cycle. See
menu message above.
1110en.gif
1111en.gif
1113en.gif
1112en.gif
1114en.gif
1008en01
To Next Page
Loading...
