Mercury MERCRUISER - Page 103

3. Support the engine with a suitable sling through the lifting eyes on the engine. Using the rear lifting eye and the opposite
side front lifting eye, maintain a minimum 26 inches on each length or use a spreader bar so that no components are
damaged.
55255
4. Remove the two rear engine mount bolts on sterndrive models.
a - Rubber washer
b - Spacer
c - Washer
d - Bolt
a
b
c
d
55237
Removal
90-8M0099748 eng DECEMBER 2015 © 2016 Mercury Marine Page 2A-7