Mercury MERCRUISER - Page 265

2. Align the dowel hole in the flywheel with the dowel in the crankshaft and install the flywheel. Tighten the screws in
sequence to the specified torque.
59594
1
2
3
4
5
6
59612
Tighten sequence
Description Nm lb‑in. lb‑ft
Flywheel mounting screws 80 – 59
3. Check the flywheel runout:
a. Attach a dial indicator to the engine block.
b. Push in on the flywheel to remove any crankshaft end play.
Engine Inspection and Assembly
90-8M0099748 eng DECEMBER 2015 © 2016 Mercury Marine Page 3B-63