Metrohm Dosimat plus 876 - 2.2 Manual Dosing Controller

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 Overview of the instrument
876 Dosimat plus
￭￭￭￭￭￭￭￭
7
1
2
5
4
3
Figure 2 Rear 876 Dosimat plus
1
Type plate
Contains specifications concerning mains
voltage and serial number.
2
Mains connection socket
3
USB (OTG) connector
For connecting printers, USB sticks, USB
hubs, etc.
4
MSB connector
Metrohm Serial Bus.
For connecting a stirrer or an 805 Dosimat.
Mini DIN, 9-pin.
5
Remote connector
For connecting the Manual Dosing Control-
ler or instruments with a remote interface.
D-Sub, 9-pin.