Metrohm Dosimat plus 876 - Saving a Method

4.3 Methods
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
22
￭￭￭￭￭￭￭￭
876 Dosimat plus
3
Load the method template
￭ Select the desired template and press [OK].
The method template is now loaded and is displayed in the main dia-
log under Method.
If a new method has been created, then the individual parameters can be
modified under Menu ▶ Parameters.
4.3.3 Saving a method
If you modify method parameters, then you can save these as your own
method. A maximum of 100 methods can be saved.
To save a method, proceed as follows:
1
Opening the method table
￭ In the main dialog, select Method and press [OK].
The method table opens: