￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
Table of contents
876 Dosimat plus
￭￭￭￭￭￭￭￭
III
Table of contents
1 Introduction 1
1.1 Instrument description ......................................................... 1
1.1.1 Dosing modes ......................................................................... 1
1.1.2 Connectors .............................................................................. 1
1.2 Intended use ......................................................................... 2
1.3 About the documentation ................................................... 2
1.3.1 Symbols and conventions ........................................................ 2
1.4 Safety instructions ................................................................ 3
1.4.1 General notes on safety ........................................................... 3
1.4.2 Electrical safety ........................................................................ 3
1.4.3 Tubing and capillary connections ............................................. 4
1.4.4 Flammable solvents and chemicals ........................................... 5
1.4.5 Recycling and disposal ............................................................. 5
2 Overview of the instrument 6
2.1 876 Dosimat plus ................................................................. 6
2.2 Manual Dosing Controller .................................................... 8
3 Installation 9
3.1 Setting up the instrument .................................................... 9
3.1.1 Packaging ................................................................................ 9
3.1.2 Checks .................................................................................... 9
3.1.3 Location .................................................................................. 9
3.2 Connecting a stirrer .............................................................. 9
3.3 Connecting the Manual Dosing Controller ....................... 10
3.4 Connecting a balance ......................................................... 10
3.5 Connecting a keyboard, printer and other USB devi-
ces ........................................................................................ 11
3.6 Connecting instruments to the remote connector .......... 13
3.7 Connecting the 805 Dosimat ............................................. 14
3.8 Attaching the exchange unit ............................................. 15
3.9 Connecting the instrument to the power grid ................. 16
4 Operation 17
4.1 Switching the instrument on and off ................................ 17
4.2 Fundamentals of operation ............................................... 18
4.2.1 The keypad ............................................................................ 18
4.2.2 Structure of the dialog windows ............................................ 18
To Next Page
Loading...
Need help?
General
