Proprietary Notice
All information set forth in this document, all rights to such information, any
and all inventions disclosed herein and any patents that might be granted by
employing the materials, methods, techniques or apparatus described herein are
the exclusive property of Metronics Incorporated, Bedford, New Hampshire.
No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, without the prior permission of Metronics Incorporated.
The information contained herein is designed only for use with the Quadra-
Chek 200 Digital Readout. Metronics Incorporated is not responsible for any
use of this information as applied to any other apparatus.
Disclaimer
The information contained in this document is subject to change without no-
tice. Metronics Incorporated assumes no responsibility or liability for any errors
or inaccuracies contained herein, or for incidental or consequential damage in
connection with the furnishing, performance, or use of this guide.
Metronics Inc. shall not be liable to the purchaser of this product or third parties
for damages, losses, costs, or expenses incurred by the purchaser or third parties
as a result of: accident, misuse, or abuse of this product or unauthorized modifi-
cations, repairs, or alterations to this product, or failure to strictly comply with
Metronics Incorporated’s operating and maintenance instructions.
Trademarks
Metronics, Quadra-Chek, Quadra-Chek 200, and QC200 are registered trade-
marks of Metronics Incorporated.
Other product names used herein are for identification purposes only and may
be trademarks of their respective owners. Metronics Incorporated disclaims any
and all rights to those marks.
Safety & Maintenance
Considerations
General safety precautions must be followed when operating the system. Failure
to observe these precautions could result in damage to the equipment, or injury
to personnel. It is understood that safety rules within individual companies vary.
If a conflict exists between the material contained in this guide and the rules of a
company using this system, the more stringent rules should take precedence.
Although Metronics strongly recommends that you read all parts of this guide, it
is essential for reliable and safe operation to read the first portions up to and
including Chapter 3: Operation, prior to operating the QC200.
To Next Page
Loading...