Location & Mounting
The QC200 must be placed or mounted on a stable, reliable surface. If the
QC200 should fall, it could become seriously damaged and more importantly
could cause injuries to the user. For mounting instructions, refer to the Getting
Started section of Chapter 3: Operation, for the mounting bolt hole pattern.
Cleaning
Use only a cloth dampened with water and a mild detergent for cleaning the
exterior surfaces. Never use abrasive cleaners, and never use strong detergents or
solvents. Only dampen the cloth, do not use a cleaning cloth that is dripping
wet.
Electrical
Do not allow the power cord to be located such that it can be walked on or create
a tripping hazard.
WARNINGWARNING
WARNINGWARNING
WARNING
Unplug the QC200 from the electrical outlet before cleaning.Unplug the QC200 from the electrical outlet before cleaning.
Unplug the QC200 from the electrical outlet before cleaning.Unplug the QC200 from the electrical outlet before cleaning.
Unplug the QC200 from the electrical outlet before cleaning.
WARNINGWARNING
WARNINGWARNING
WARNING
The QC200 is equipped with a 3-wire power plug that includesThe QC200 is equipped with a 3-wire power plug that includes
The QC200 is equipped with a 3-wire power plug that includesThe QC200 is equipped with a 3-wire power plug that includes
The QC200 is equipped with a 3-wire power plug that includes
a separate ground connection. Always connect the power pluga separate ground connection. Always connect the power plug
a separate ground connection. Always connect the power pluga separate ground connection. Always connect the power plug
a separate ground connection. Always connect the power plug
to a 3-wire grounded outlet. The use of 2-wire power plugto a 3-wire grounded outlet. The use of 2-wire power plug
to a 3-wire grounded outlet. The use of 2-wire power plugto a 3-wire grounded outlet. The use of 2-wire power plug
to a 3-wire grounded outlet. The use of 2-wire power plug
adapters or any other connection accessories that remove theadapters or any other connection accessories that remove the
adapters or any other connection accessories that remove theadapters or any other connection accessories that remove the
adapters or any other connection accessories that remove the
third grounded connection create a safety hazard and shouldthird grounded connection create a safety hazard and should
third grounded connection create a safety hazard and shouldthird grounded connection create a safety hazard and should
third grounded connection create a safety hazard and should
not be permitted. If a 3-wire grounded outlet is not available,not be permitted. If a 3-wire grounded outlet is not available,
not be permitted. If a 3-wire grounded outlet is not available,not be permitted. If a 3-wire grounded outlet is not available,
not be permitted. If a 3-wire grounded outlet is not available,
ask your electrician to provide one.ask your electrician to provide one.
ask your electrician to provide one.ask your electrician to provide one.
ask your electrician to provide one.
General Maintenance
Unplug the QC200 from the wall outlet and seek the assistance of a qualified
service technician if:
• The power cord is frayed or damaged or the power plug is damaged
• Liquid is spilled or splashed onto the enclosure
• The QC200 has been dropped or the exterior has been damaged
• The QC200 exhibits degraded performance or indicates a need for ser
vice some other way
To Next Page
Loading...