Introduction
About this Guide
The material in this guide is divided into eight chapters. Topics range from basic
operating instructions to programming and system configuration. Chapters 1
through 3 contain the essential information to use the QC200. Do not operate
the QC200 unless the material in these chapters is thoroughly understood.
Keep this guide in a convenient location. Refer to it any time additional informa-
tion about the use and operation of the QC200 is needed. Use the index to
locate information by subject. Additional information related to this guide can
be found on the Internet at www.metronics.com/help.html.
Who Should Read
This Guide
This guide is intended for operators, technicians, supervisors, and dealer repre-
sentatives.
NOTENOTE
NOTENOTE
NOTE
System setup and configuration instructions provided in chapterSystem setup and configuration instructions provided in chapter
System setup and configuration instructions provided in chapterSystem setup and configuration instructions provided in chapter
System setup and configuration instructions provided in chapter
7 are intended for qualified supervisors, dealer representatives7 are intended for qualified supervisors, dealer representatives
7 are intended for qualified supervisors, dealer representatives7 are intended for qualified supervisors, dealer representatives
7 are intended for qualified supervisors, dealer representatives
and OEMs onlyand OEMs only
and OEMs onlyand OEMs only
and OEMs only
. Operators should not attempt to alter the. Operators should not attempt to alter the
. Operators should not attempt to alter the. Operators should not attempt to alter the
. Operators should not attempt to alter the
configuration of the QC200.configuration of the QC200.
configuration of the QC200.configuration of the QC200.
configuration of the QC200.
What This Guide
Covers
Chapter 1: Overview
This chapter describes the use and application of the QC200 digital readout and
includes an annotated drawing and technical specifications.
Chapter 2: Quick-start
Use this chapter as a basic user tutorial. The quick start demonstration provides
QC200 operation instructions with a minimum of details.
Chapter 3: Operation
This chapter includes detailed descriptions of controls and indicators, and in-
structions for measuring, constructing, creating, and tolerancing features.
To Next Page
Loading...