Metronics Quadra-Chek 200 - Page 71

Quadra-Chek
®
QC200
3-21
There are five soft keys displayed on a graphic screen: recall, view, change, zoom,
and tolerance (tol).
Press the recall soft key to view the data screen of another feature.
Press the view soft key to toggle the screen between data and graphic.
Press the change soft key to select the desired algorithm used to calculate the
feature.
NOTENOTE
NOTENOTE
NOTE
Features measured with the minimum required points areFeatures measured with the minimum required points are
Features measured with the minimum required points areFeatures measured with the minimum required points are
Features measured with the minimum required points are
calculated using LSBF onlycalculated using LSBF only
calculated using LSBF onlycalculated using LSBF only
calculated using LSBF only
. No other algorithm can be chosen.. No other algorithm can be chosen.
. No other algorithm can be chosen.. No other algorithm can be chosen.
. No other algorithm can be chosen.
Additional points are required to calculate with any otherAdditional points are required to calculate with any other
Additional points are required to calculate with any otherAdditional points are required to calculate with any other
Additional points are required to calculate with any other
algorithm.algorithm.
algorithm.algorithm.
algorithm.
NOTENOTE
NOTENOTE
NOTE
Features measured with measure magic have different Features measured with measure magic have different
Features measured with measure magic have different Features measured with measure magic have different
Features measured with measure magic have different
changechange
changechange
change
soft keysoft key
soft keysoft key
soft key
options. For example, press the options. For example, press the
options. For example, press the options. For example, press the
options. For example, press the
change soft keychange soft key
change soft keychange soft key
change soft key
to to
to to
to
change the type of feature from line to circle.change the type of feature from line to circle.
change the type of feature from line to circle.change the type of feature from line to circle.
change the type of feature from line to circle.