Metronics Quadra-Chek 200 - Page 90

Chapter 3 Operation
3-40
The display shows the points as they are entered.
Step 5
Press the finish key.
The line feature data is displayed on the screen and added to the feature list.
Press the view soft key for a graphic representation of the line feature.
NOTENOTE
NOTENOTE
NOTE
Press the Press the
Press the Press the
Press the
change soft keychange soft key
change soft keychange soft key
change soft key
to change the best-fit algorithm used to change the best-fit algorithm used
to change the best-fit algorithm used to change the best-fit algorithm used
to change the best-fit algorithm used
to calculate the line if desired. Fit algorithms used by the QC200to calculate the line if desired. Fit algorithms used by the QC200
to calculate the line if desired. Fit algorithms used by the QC200to calculate the line if desired. Fit algorithms used by the QC200
to calculate the line if desired. Fit algorithms used by the QC200
for lines are as follows:for lines are as follows:
for lines are as follows:for lines are as follows:
for lines are as follows:
•
LSBF:LSBF:
LSBF:LSBF:
LSBF:
Fit determined by minimizing the sum of theFit determined by minimizing the sum of the
Fit determined by minimizing the sum of theFit determined by minimizing the sum of the
Fit determined by minimizing the sum of the
squared point deviation from the form fit.squared point deviation from the form fit.
squared point deviation from the form fit.squared point deviation from the form fit.
squared point deviation from the form fit.
•
ISO:ISO:
ISO:ISO:
ISO:
Fit determined by minimizing the formFit determined by minimizing the form
Fit determined by minimizing the formFit determined by minimizing the form
Fit determined by minimizing the form
(straightness) deviation.(straightness) deviation.
(straightness) deviation.(straightness) deviation.
(straightness) deviation.
Press the view soft key to return to the line data screen.