28
4.18.3 UPPER
Thenominal value is used for executing the addition of Hi Limit.
4.18.4 LOWER
The nominal value is used for executing the subtraction of Lo Limit. If
selecting “△Abs” or “△%”, then the user needs to key in the negative
mark before inputting the digits for the negative tolerance.
4.19 BIN SETUP
Select <Bin> for setting the bin conditions of each parameter, including Bin class
2~9. The Bin Method comprises sequence, error, random, equalization; whereas,
the Value Mode comprises the Measuring Value, Tolerance value and
Tolerance %.
4.19.1 PARAMETER and BIN NUMBER
Select the parameter and display up to 9 classifications of judgment
results.
To Next Page
Loading...
Need help?
General
