Microtest 6632 Series - File; Recal; New; Save as

31
4.20 FILE
The parameter can be saved in the flash Memory of the instrument. The Meter
Mode allows the user to access 100 setup groups, and the Multi-step List Test
Mode allows the user to access 50 setup groups (with each group containing 15
measuring steps).
4.20.1 RECAL
After selecting the file to be opened with <Direction> key, click
<Open> function key and you can enter the file.
4.20.2 NEW
Select <New> function key and the user can set up an empty file. After
setting the file name, press <OK> and return to the Main Page for
proceeding with the parameter setup.
4.20.3 SAVE AS
After setting the parameter, select <Save As> function key and set the
file name. Next, press <OK> and the parameter setup can be saved in
the new file.
4.20.4
DELETE
Select <DELETE> function key to delete the file, the file which is being
used cannot delete.