Microtest 6632 Series - Sweep Subsystem

80
 SWEep Subsystem
<Command>
:SWEep:TYPE {FREQuency|VAC|IAC}
:SWEep:TYPE?
Function：It sets or queries the TYPE.
Description：
Set parameter
FREQuency | VAC(voltage) |IAC(current)
Set syntax :SWEep:TYPE FREQuency
Query syntax
:LIST:RETest?
Return data
FREQ | VAC | IAC (Format is in <disc>)
<Command>
:SWEep:XAXis {LOGarithm|LINear}
:SWEep:XAXis?
Function：It sets or queries the XAXIS.
Description：
Set parameter
LOGarithm | LINear
Set syntax
:SWEep:XAXis LOGarithm
Query syntax
:SWEep:XAXis?
Return data
LOG | LIN (Format is in <disc>)
<Command>
:SWEep:XAXis:DATA?
Function：It queries the XAXIS data.
Description：
Querysyntax
:SWEep:XAXis:DATA?
Return
data+1.000000E+03,+1.209960E+05,+2.409920E+05,+3.609880E+05,…+3.000000E+07(For
mat is in <NR3>)
<Command>
:SWEep:STARt <startNR3/disc>
:SWEep:STARt?
Function：It sets or queries the START.
Description：
Set parameterThe start value of frequency is {10.0~30000000.0|MAXimum|MINimum}.
The start value of
voltage AC RO 100Ω
is {0.01~2|MAXimum|MINimum}.
The start value of
voltage AC RO
25Ω is {0.01~1|MAXimum|MINimum}.
The start value of current
AC RO 100Ω
is {
0.0002~0.02
|MAXimum|MINimum}.
The start value of current
AC RO
25Ω is {
0.0002~0.04|MAXimum|MINimum}.
Setsyntax
:SWEep:STARt 0.5
:SWEep:STARt 500M
:SWEep:STARt 5E-3
:SWEep:STARt MAXimum
:SWEep:STARt MINimum
Query syntax
:SWEep:STARt?
Return
data+5.000000E-01(Format is in <NR3>)