88
Read the measured value
Read the measured value
Read Data format under Meter Mode
<para 1 data>,<para 2
data>,<para 3 data>,
<para 4 data>,<status
>,<bin num
ber>,<para
1 compare status>,
<para com
pare status>,<para 3 com
pare status>,<para 4 com
pare status>
para 1-4 data
During value measuring, not all of four values will be displayed. The value will be
displayed when the opening display parameters are available. For example, if only two
parameters are opened, then only two count of value will be transmitted.
status – Measuring status, and the weighted value of each status refers to the final value.
0 – Normal status without special status and without comparison.
1 – Measuring schedule error
2 – ALC error
4 – Other errors
8 – Reserve
16 – All parameters OK
32 – Some parameters NG
bin number – Categorization result, and such value will not be displayed when closing
the bin function.
-1 – bin out, not in the categorization number
1 – 9 – bin number, the categorization result is 1-9.
para compare status 1-4
Measuring comparison result: If any parameter comparison function is opened, then the
comparison result will be displayed for all of the opened parameters.
0 – No comparison
1 – Parameter comparison result OK
2 – Parameter comparison result NG
Value transmit mode under Multi-step Test Mode.
<result>,<direction>,<bin number>,<step 1 result>,<step 1 data>,<step 2 result>,<step 2
data>,
<step 3 result>,<step 3 data>........<step n result>,<step n data>
result – Finally judged test result
0 – Test not interrupted. Not completed
1 – Test steps all OK
2 – NG occurs to the test step
bin number - categorization result, and such value will not be displayed when closing the
bin function.
-1 - bin out not in the categorization number
1-9 - bin number the categorization result is 1-9
step result
0 – no test
1 – test OK
2 – test NG
step data
test value
To Next Page
Loading...
Need help?
General
