Microtest 6632 Series - Load Function; Reference; Load

52
7.9 LOAD FUNCTION
Click the <↑><↓> swap the primary and secondary parameters.
(EX:<G-B>、<R-X>、<CP-RP>、<CP-D>、<CS-RS>、<CS-D>、<LP-RP>、<LP-
Q>、<LS-RS>、<LS-Q>、<Y-Deg>、<Z-Deg>。
7.10 Reference
Insert the known values with measurements as reference values
7.11 Load
It is the value that is measured in the beginning to correct the result value.