Microtest 6632 Series - Page 92

87
<Command>
:SWEep:RESult?
Function：It queries all of the value data of TRACE A and TRACE B.
Description：
Query syntax
:SWEep:RESult?
Return
data+2.218913E-04,+2.215632E-04,+2.216804E-04…(Format is in <NR3>). It uploads
the TRACE A data at the beginning. It start uploading TRACE B data when finish uploading
TRACE A data.
<Command>
:SWEep:ANALysis:RESult?
Function：：It queries all of the value data and corresponding frequency | voltage | current of
TRACE A and TRACE B.
Description：
Query syntax
:SWEep:ANALysis:RESult?
Return data +1.000000E+03 , +2.212126E-04 , +1.398695E+00 , +1.035500E+03 ,
+2.209532E-04 , +1.446218E+00…(Format is in <NR3>). It uploads the TRACE A data at the
beginning. It start uploading TRACE B data when finish uploading TRACE A data.
<Command>
:SWEep:ANALysis:CALCulate?
Function：It queries the data of R1, L1, C1, C0 and R0 which are in the ANALYSIS mode.
Description：
Query syntax
:SWEep:ANALysis:CALCulate?
Return data +1.076054E+05 , +2.209770E-04 , +2.138633E-11 , +1.588589E-01 (Format is in
<NR3>).
<Command>
:SWEep:SRF:SERies?
Function：It queries the SRF fs (self-resonant frequency serial).
Description：
Query syntax
:SWEep:SRF:SERies?
Return
data +2.310130E+06 (Format is in <NR3>).
<Command>
:SWEep:SRF:PARallel?
Function：It queries the SRF fp (self-resonant frequency parallel).
Description：
Query syntax
:SWEep:SRF:PARallel?
Return
data +2.310130E+06 (Format is in <NR3>).