Microtest 6632 Series User Manual

70
<Command> :MEASure:COMParator:NOMinal <nominal value NR3>
:MEASure:COMParator:NOMinal?
Function：It sets or queries the NOMINAL.
Description：
Set syntax
:MEASure:COMParator:NOMinal 1000
:MEASure:COMParator:NOMinal 1K
:MEASure:COMParator:NOMinal 1E+03
Query syntax
:MEASure:COMParator:NOMinal?
Return
data 1.000000E+03 (Format is in <NR3>)
<Command> :MEASure:COMParator:UPPER <upper limit NR3>
:MEASure:COMParator:UPPER?
Function：It sets or queries the UPPER.
Description：
Set syntax
:MEASure:COMParator:UPPER 1
:MEASure:COMParator:UPPER1000M
:MEASure:COMParator:UPPER 1E+00
Query syntax
:MEASure:COMParator:UPPER?
Return
data 1.000000E+00 (Format is in <NR3>)
<Command> :MEASure:COMParator:LOWER <LOWER limit NR3>
Function：It sets or queries the LOWER.
Description：
Set syntax
:MEASure:COMParator:LOWER -1
:MEASure:COMParator:LOWER -1000M
:MEASure:COMParator:LOWER -1E+00
Query syntax
:MEASure:COMParator:LOWER?
Return
data -1.000000E+00 (Format is in <NR3>)
<Command> :MEASure:COMParator:DISPlay <ABSolute|DEViation|PERCent|0|1|2>
:MEASure:COMParator:DISPlay?
Function：It sets or queries the DISP MODE.
Description：
Set parameter
ABSolute,0|DEViation,1|PERCent,2
Set syntax
:MEASure:COMParator:MODE DEViation
Query syntax
:MEASure:COMParator:MODE?
Return
dataDEV(Format is in <disc>)
<Command> :MEASure:BIN:PARAmeter
{OFF|RDC|LS|LP|CS|CP|Q|D|RS|RP|Z|DEG|RAD|R|X|Y|G|B|E|U}
:MEASure:BIN:PARAmeter?
Function：It sets or queries the BIN Parameter.
Description：
Set syntax
:MEASure:BIN:PARAmeter Z(only allow the parameter which is being used
under
the meter mode.)
Query syntax
:MEASure:PARAmeter?
Return
dataZ(Format is in <disc>)

Microtest 6632 Series Specifications

General

Brand	Microtest
Model	6632 Series
Category	Measuring Instruments
Language	English