Microtest 6632 Series - Page 80

75
<Command>
:LIST:COMParator:NOMinal <nominal value NR3 >
:LIST:COMParator:NOMinal?
Function：It sets or queries the NOMINAL of list mode.
Description：
Set syntax
:LIST:COMParator:NOMinal 1000
:LIST:COMParator:NOMinal 1K
:LIST:COMParator:NOMinal 1E+03
Query syntax
:LIST:COMParator:NOMinal?
Return
data 1.000000E+03 (Format is in <NR3>)
<Command>
:LIST:COMParator:UPPER <upper limit NR3>
:LIST:COMParator:UPPER?
Function：It sets or queries the UPPER of list mode.
Description：
Set syntax
:LIST:COMParator:UPPER 1
:LIST:COMParator:UPPER1000M
:LIST:COMParator:UPPER 1E+00
Query syntax
:LIST:COMParator:UPPER?
Return data 1.000000E+00 (Format is in <NR3>)
<Command>
:LIST:COMParator:LOWER <LOWER limit NR3>
:LIST:COMParator:LOWER?
Function：It sets or queries the LOWER of list mode.
Description：
Set syntax
:LIST:COMParator:LOWER -1
:LIST:COMParator:LOWER -1000M
:LIST:COMParator:LOWER -1E+00
Query syntax
:LIST:COMParator:LOWER?
Return
data
-1.000000E+00 (Format is in <NR3>)
<Command>
:LIST:BIN:PARAmeter
{OFF|RDC|LS|LP|CS|CP|Q|D|RS|RP|Z|DEG|RAD|R|X|Y|G|B|}
:LIST:BIN:PARAmeter?
Function：It sets or queries the BIN Parameter of list mode.，
Description：
Set syntax
:LIST:BIN:PARAmeter Z(only allow the parameter which is being used under the
list mode.)
Query syntax
:LIST:PARAmeter?
Return data Z (Format is in <disc>)
<Command>
:LIST:BIN:NUMBer {2|3|4|5|6|7|8|9|MAXium|MINimum}
:LIST:BIN:NUMBer?
Function：It sets or queries the BIN NUMBER of list mode.
Description：
Set parameter
The value of bin number is {2~9|MAXimum|MINimum}.
Set syntax
:LIST:NUMBer 4
Query syntax
:LIST:NUMBer?
Return data 4 (Format is in <NR1>)